The Fullbore Flowmeter combine with our Temperature tool will allow you to run a production profile. The FBFM has a three arm spring loaded cage to center the impellers in multiple casing sizes so you only have to buy one tool. The blades design allow the impeller to work on small production rate wells do to the use of low friction bearings and the large cross sectional area. The tool is supplied with
ancillary items that allow you to run in all casing sizes from 4-1/2” to 9-5/8”.
Features:
- Injection and production flow profiling
- Leak detection
- Low or hi flow rates
| Temperature Rating | 177°C (350°F) |
| Pressure rating | 103.4 MPa (15,000 psi) |
| Tool Diameter | 43mm (1-11/16”) |
| Length | 1064mm (41.92”) (Electronics + Fullbore) |
| Weight | 3.6kg (8lb) |
| Casing range | 4-1/2” to 9-5/8” |
| Flow output | 10 pulses/revs (directional) |
| Threshold | <0.5m/min (<1.6ft/min) |
| Max fluid velocity | 90Bpd |
| Material | Sour Service |
| Connector | go-connector (single pin) |
| Flow measure point | 414mm (16.3”) |
Eng +R&D Corp.