Fullbore Spinner
The Fullbore Flowmeter combined with our Temperature tool will allow you to run a production profile. The FBFM has a three-arm spring-loaded cage. You only have to buy one tool to center the impellers in multiple casing sizes. The blade design allows the impeller to work on small production rate wells due to low-friction bearings and the large cross-sectional area. The tool is supplied with ancillary items that allow you to run in all casing sizes from 4-1/2” to 9-5/8”.
| Temperature Rating | 177°C (350°F) |
| Pressure rating | 103.4 MPa (15,000 psi) |
| Tool Diameter | 43mm (1-11/16”) |
| Length | 1064mm (41.92”) (Electronics + Fullbore) |
| Weight | 3.6kg (8lb) |
| Casing range | 4-1/2” to 9-5/8” |
| Flow output | 10 pulses/revs (directional) |
| Threshold | <0.5m/min (<1.6ft/min) |
| Max fluid velocity | 90Bpd |
| Material | Sour Service |
| Connector | go-connector (single pin) |
| Flow measure point | 414mm (16.3”) |
+1 (832) 886-1484
+1 (403) 561-7174
Eng +R&D Corp. 16360 Park Ten Place suite 104 Houston, Texas 77084 – United States of America
